Short answer: the year the outdoor unit was made is the best clue. Units made before 2010 may use R-22, because EPA rules ended the manufacture of new R-22 air conditioners in 2010. Units made from 2010 through 2024 most likely use R-410A. Units made in 2025 or later must use a refrigerant with a global warming potential (GWP) under 700, most often R-454B or R-32. The data plate on the outdoor unit is the final word. Enter a year below to see the likely refrigerant, the unit's age, and what it means for repairs in Katy, TX.
Refrigerant and age checker
The manufacture date on the data plate is best. Installation year or the year the house was built also works as a clue.
How the checker works
| Unit made | Likely refrigerant | Rule behind it |
|---|---|---|
| Before 2010 | R-22 likely; R-410A possible | New R-22 air conditioners could not be made after 2010; R-410A was the main replacement refrigerant (EPA) |
| 2010 to 2024 | R-410A most likely | R-22 no longer allowed in new units; R-410A was standard until the 2025 limit |
| 2025 or later | R-454B or R-32 | 700 GWP limit for new residential AC made or imported from Jan. 1, 2025 (EPA's technology transitions table) |
Methodology and sources
- R-22 cutoff. EPA describes R-22 as the most common home AC refrigerant for decades, says units made before 2010 can still be serviced with it, and says that after 2020 only recycled, reclaimed or previously produced R-22 can be used for service.
- The AIM Act. The American Innovation and Manufacturing (AIM) Act was enacted on Dec. 27, 2020. Under it, EPA set a GWP limit of 700 for new residential and light commercial AC and heat pumps made or imported from Jan. 1, 2025 (EPA's technology transitions table). R-410A is above that limit, which is why new equipment moved to R-454B and R-32.
- Leftover R-410A inventory. a 2026 EPA rule (91 FR 31284), effective July 27, 2026, lets equipment made or imported before Jan. 1, 2025 continue to be installed. So a system installed in 2025 or 2026 can still be R-410A. The checker says so when you enter an installation year.
- R-454B and R-32 handling. EPA's SNAP listings list both as acceptable for new home AC subject to use conditions. They carry the A2L (mildly flammable) safety class.
- Age. Age is the current year minus the year you enter. The 10-year flag comes from ENERGY STAR guidance to consider replacing a heat pump or air conditioner that is more than 10 years old.
- What it can't know. Whether the system was replaced since the house was built, or whether an installer used older stock. Installation year can lag manufacture year by months or more.
Serial number decoding: not included. Each manufacturer uses its own serial format, and a decoder would need each maker's published key. If the data plate shows no manufacture date, the manufacturer can decode the serial number for you.
What this means in Katy
Census data shows 64.1% of homes in Katy's 77450 ZIP were built before 2000, while 81.3% of homes in Fulshear's 77441 were built in 2010 or later. The R-410A to R-454B guide maps each Katy ZIP's home ages to the likely original refrigerant. Also see Katy AC age by ZIP code.
More homeowner tools: repair or replace calculator, AC size checker, or see all tools.
Frequently asked questions
How do I tell which refrigerant my AC uses?
Check the data plate on the outdoor unit. It lists the refrigerant type and the factory charge. The year-based answer from this tool is only a likely answer.
Can I still get R-22 for repairs?
Yes, from limited supply. EPA says that after 2020 only recycled, reclaimed or previously produced R-22 can be used to service existing equipment. EPA does not require anyone to replace or convert a working R-22 system.
Is R-410A banned in 2026?
No. Existing R-410A systems can keep running and can be repaired. Under a 2026 EPA rule, new R-410A systems can still be installed if all specified components were made or imported before Jan. 1, 2025. Equipment made in 2025 or later must use a refrigerant under 700 GWP.
Can R-454B be added to an R-410A system?
No. EPA lists R-454B and R-32 as acceptable for new home AC only subject to use conditions, and they are mildly flammable. Equipment has to be designed for the refrigerant it uses.
Talk to a local AC pro
Not sure what your system uses, or whether an R-22 or R-410A repair is worth it? Call (281) 653-5399 to get connected with an independent local HVAC company that serves Katy, Cinco Ranch, Fulshear, Richmond and nearby. The pro inspects the system and gives their own estimate before any work.
Next steps: AC repair in Katy, AC installation and replacement, maintenance and tune-ups and emergency AC repair. Neighborhood pages: Cinco Ranch, Cross Creek Ranch and Fulshear.